Kevlar high-temperature air slidea fabric is a specialty industrial textile manufactured using DuPont’s Kevlar aramid fibers, specifically engineered for extreme high-temperature and high-pressure operating conditions. While maintaining excellent air permeability, this product offers significantly superior heat resistance and mechanical strength compared to conventional materials.
Caractéristiques principales
Ultra-high temperature resistance:
- Continuous service temperature range: -196°C to 260°C
- Short-term exposure resistance up to 480°C
Outstanding mechanical properties:
- Tensile strength >3000MPa
- Wear resistance meets highest grade of ISO 12947-3 standard
Special functions:
- Inherent flame retardant (LOI >28)
- Optional anti-static treatment (surface resistance 10⁶-10⁹Ω)
- Resistant to most acids and alkalis (except concentrated sulfuric acid and strong oxidizers)
Paramètres techniques
Paramètres | Spécifications | Test Standard |
Air permeability | 5-50L/m²·s@200Pa | ISO 9237 |
Épaisseur | 0.8-3.2mm (customizable) | ISO 5084 |
Surface density | 300-1200g/m² | ISO 3801 |
Porosity | 30-60% (adjustable) | ASTM D737 |
Typical Applications
♦High-Temperature Material Handling
Carbon fiber production lines
Metal powder pneumatic conveying
Ceramic sintering furnace seals
♦Industrial Protection
Molten metal splash curtains (foundry/metallurgy)
Explosion-proof barriers in chemical plants
Thermal shields for aerospace engine testing
♦Harsh Environment Filtration
Waste incineration flue gas treatment
Catalyst recovery in petrochemical industry
Specialized nuclear filtration systems
Usage Guidelines
Installation
Maintain 5-10% pre-tension
Use high-temperature sealing strips
Maintenance
Cleaning: Low-pressure steam (<0.2MPa) or specialty solvents
Inspection: Visual check every 500 operating hours
Sécurité
Avoid concentrated sulfuric acid/strong oxidizers
Corrosion evaluation required for extreme pH environments
Competitive Comparison
Property | Kevlar® Fabric | Standard Aramid | Improvement |
Max temperature | 260℃ | 180℃ | +40% |
Service life | 3-5 years | 8-12 months | 300-500% |
Strength-to-weight | 1.44g/cm³ | 1.38g/cm³ | +50% strength |
Customization Services
Darko offer:
✓ Functional treatments: Conductive/antimicrobial/oleophobic
✓ Structural enhancements: Multi-layer/edge reinforcement
✓ Dimensional customization: Up to 3.2m wide continuous rolls
Note: Please provide specific operating parameters for optimized solutions.
Certifications: ISO 9001 / ISO 14001 / Explosion-proof (optional)
Technical Support: On-site installation guidance & failure analysis
FR 
EN_US 
RU 
PT 
AR 
ES 
JA