The three way diverter valve is mainly used for discharging and diverting materials at the bottom of cement silo.
Structure characteristic
The three way diverter valve is welded with high-quality steel plates and equipped with different actuators according to different needs. It has the characteristics of lightness and wear resistance, clear opening instructions, convenient switching, and flexible operation.
It is a positive Three-way slide, and its driving modes are divided into: S manual, D electric, Z automatic, Q pneumatic, Y electro-hydraulic.
Performance parameter
| working pressure | proper temperature |
Suitable material specific gravity |
Suitable medium |
|
0.01MPa |
≤300℃ |
≤2.5t/m3 |
Crystal, grain and powder etc |
Transmission device parameter
|
Type |
200~250 | 300~400 | 500~600 | 700~800 |
|
Electric draw stem |
DTⅠA63-M
P：0.06KW |
DTⅠA63-M
P：0.09KW |
DTAⅡ100-M
P：0.25KW |
DTⅡA250-M
P：0.37KW |
|
Automatic device |
DKJ-210
P：0.025KW |
DKJ-310
P：0.065KW |
DKJ-410
P：0.16KW |
DKJ-510
P：0.25KW |
|
Pneumatic draw stem |
10A-5TC50B | 10A-5TC63B | 10A-5TC80B | 10A-5TC100B |
|
Electric hydraulic |
DYT100
P：0.37KW |
DYT300
P：0.37KW |
||
Appearance figure
Transportation and protection
- Avoid bumping and the valve is in full close in order to avoid damage of disc and driving part.
- Transmission device and part should be hung up when the valve is in horizontal in order to prevent damage of driving axle.
- Treatment of dampproof and rainproof should be done to transmission device and part.
- The valve should be stored in dry room. It should be in full close state when long stored. Add lubrication to the transmission part and the device should be dampproof and dustproof.
Maintenance and examination
- Examine the operating condition of driving part regularly.
- Replace the lubrication of actuator reducer, lubricating grease of electric draw stem and motor oil of electric hydraulic draw stem regularly.
- Examine the seal condition of rotate axle regularly. Replace or add graphite stuffing if there is mistake.
- Examine the plunger joint ring of electric hydraulic draw stem and pneumatic draw stem in order to ensure the normal operation of transmission device.
